Why is the medical door only suitable for use in hospitals or clean places? Many people may be wondering at the same time. Below are the technical staff of Moenke to introduce to you. I hope our introduction can help you better.
1. Medical automatic door lowering system: It is a guiding and positioning device for the lower part of the door leaf, which prevents the front and rear doors from appearing when the door leaf is running. When the door is opened and closed, the work flow is as follows: When the medical automatic door sensor detects that someone has entered, the pulse signal is sent to the main controller. After the main controller, the operation of the motor is judged, and the speed of the motor is monitored at the same time. run time and slow entry into the afterburner. The motor runs forward after running the current, the power is transmitted to the belt, and the spreader system that transmits the power to the belt makes the door open; opening the door leaf is judged by the controller, such as the medical automatic door is closed, the motor is notified to move in the reverse direction, and the medical automatic door is closed.
2. Medical automatic door track: just like the train track, the door leaf spreader wheel restraint system, according to a specific direction;
3. Medical automatic door opening and closing power motor: main power, acceleration and deceleration control door operation;
4. Medical automatic door, hanging wheel suspension system: while moving the door leaf, the medical traction drives the door to operate;
5. Medical automatic door sensor: The medical automatic door is responsible for collecting external signals, such as people’s eyes, when the moving object is brought into its working range, it is the pulse signal of the main controller;
6. Synchronous belts for medical automatic doors (some manufacturers use V-belts): used to transmit motor power and pull the traveling wheel blade spreader system.
7. Medical automatic door controller: It is the command center of the automatic door. It plans large-scale integrated blocks through internal program instructions, and commands the work of the car or electric lock system through corresponding instructions; at the same time, the main controller adjusts the speed and opens the doors and windows. .
Post time: May-31-2022